Advanced Setup; Ip Settings - AirTies AP-400 User Manual

Advanced Setup

4.
To configure the installation settings of your AirTies AP-400, open a web browser (e.g.
Internet Explorer, Mozilla Firefox, Netscape). In the Address field enter 192.168.2.254, the
default IP address of the device, and press Enter. This will launch the web interface of
your AirTies AP-400.
You will be prompted for a password to login. There is no password set by default. Initially,
leave this field blank and continue by clicking "Submit".
In the screen that appears, the "Welcome" screen, a summary of the current network
and device settings are displayed.

IP Settings

4.1.
You can change the IP address, the subnet mask and the gateway address of the AP-
400 by going to the" IP Settings" submenu under the "LAN" menu of the web interface.
You can get these values from your network administrator.
Note: If you change the IP address of the AP-400, you must use the new address to
connect to the AP-400's web interface.
9
AirTies AP-400 User Manual