Configuring The Ap-400 As A Bridge - AirTies AP-400 User Manual

In this window, after you check the "Activate Bridge/Repeater Connections" box, check
the box to the left of the AP-400 that you have already configured and click "Save".
The RT-211 and the AP-400 will now recognize each other. At the point where the wireless
signal from the RT-211 weakens, the AP-400 will boost the signal and extend the coverage
area.
Note: You can only use WEP encryption in a wireless network with a MESH structure. You
can find more information about WEP encryption settings in the Wireless Security section
of this manual.

Configuring the AP-400 as a Bridge

4.3.3.
You can include a wired device (e.g. printer) in your wireless network by connecting the
device to one of the LAN ports of an AP-400 operating in Bridge mode. The diagram
below is an example of the AP-400's use as a bridge (connected to a printer).
14
AirTies AP-400 User Manual