Automatic Transaxle (Cvt) - If Equipped - Jeep Patriot 2010 Owner's Manual

404 MAINTAINING YOUR VEHICLE
WARNING! (Continued)
• Overfilling the brake fluid reservoir can result in
spilling brake fluid on hot engine parts, causing
the brake fluid to catch fire. Brake fluid can also
damage painted and vinyl surfaces, care should be
taken to avoid its contact with these surfaces.
• Do not allow petroleum based fluid to contami-
nate the brake fluid. Brake seal components could
be damaged, causing partial or complete brake
failure. This could result in an accident.
CAUTION!
Use of improper brake fluids will affect overall
clutch system performance. Improper brake fluids
may damage the clutch system resulting in loss of
clutch function and the ability to shift the transaxle.
Automatic Transaxle (CVT) – If Equipped
Selection Of Lubricant
It is important that the proper lubricant is used in the
transaxle to assure optimum transaxle performance. Use
only the manufacturer's recommended transmission
fluid which has been formulated with special metal to
metal friction coefficient additives to provide the proper
steel belt traction on the drive and driven pulleys. Refer
to "Fluids, Lubricants, and Genuine Parts" in this section
for the correct fluid type.
CAUTION!
Using a transmission fluid other than the manufac-
turer's recommended fluid will cause belt slip and
result in a complete transmission failure! Refer to
"Fluids, Lubricants, and Genuine Parts" in this sec-
tion for the correct fluid type.