Preparations For Jacking; Jacking Instructions - Jeep Patriot 2010 Owner's Manual

Preparations For Jacking

1. Park the vehicle on a firm, level surface. Avoid ice or
slippery areas.
WARNING!
Do not attempt to change a tire on the side of the
vehicle close to moving traffic. Pull far enough off
the road to avoid the danger of being hit when
operating the jack or changing the wheel.
2. Set the parking brake.
3. Place the shift lever into PARK (automatic transmis-
sion) or REVERSE (manual transmission).
4. Turn OFF the ignition.
5. Turn on the Hazard Warning flasher.
WHAT TO DO IN EMERGENCIES 369
6. Block both the front and rear of the
wheel diagonally opposite the jacking
position. For example, if changing the
right front tire, block the left rear
wheel.
NOTE: Passengers should not remain in the vehicle
while the vehicle is being jacked.

Jacking Instructions

WARNING!
Carefully follow these tire changing warnings to
help prevent personal injury or damage to your
vehicle:
6
(Continued)