DFI LanParty PRO875B User Manual page 20

Rev. a+ system board
Hide thumbs Also See for LanParty PRO875B:
Table of Contents

Advertisement

2
English
Onboard CSA Gigabit LAN Features
• Uses 82547EI Gigabit LAN CSA (Communication Streaming
Architecture) interface
• Integrated power management functions
• Full duplex support at 10, 100 and 1000 Mbps
• Supports IEEE 802.3u auto-negotiation
• Supports wire for management
ATA RAID - Redundant Array of Independent Disk
• Uses HighPoint 372N RAID controller
• RAID 0, 1, 0+1 and 1.5
-
• Two independent IDE channels suppor t up to 4
(ATA/33, ATA/66, ATA/100, ATA/133 or EIDE)
• Suppor ts PIO modes 0/1/2/3/4, DMA modes 0/1/2 and
UDMA modes 0/1/2/3/4/5/6
PCI Bus Master IDE Controller
• Supports ATA/33, ATA/66 and ATA/100 hard drives
• PIO Mode 4 Enhanced IDE (data transfer rate up to 14MB/
sec.)
• Bus mastering reduces CPU utilization during disk transfer
• Supports ATAPI CD-ROM, LS-120 and ZIP
ICH5R SATA IDE/RAID Interface
• Two SATA (Serial ATA) interfaces which are compliant with
SATA 1.0 specification (1.5Gbps interface)
• Supports RAID 0 and 1
Processor Socket
• Socket 478
AGP (Accelerated Graphics Port)
• Supports AGP 3.0 (AGP 4x and 8x) and AGP 2.0 (AGP 1x and
4x) spec.
• Supports 1.5V AGP 8x (2.13GB/sec.) and AGP 4x (1066MB/
sec.) add-in cards. AGP 2x and 3.3V AGP cards are not sup-
ported.
20
RAID 1.5 performs data stripping and mirroring simultane-
ously using two drives only
drives

Advertisement

Table of Contents
loading

Table of Contents