Spektrum DX7 Instruction Manual page 19

Model Select/Copy Function
The DX7 features a memory function that stores the programmed data for up to 20 models. Any combination of
up to 20 airplanes and/or helicopters can be stored in memory. A model name feature with up to eight characters
allows each model to be easily identified (see page 38).
UP and DOWN key
[MODEL SELECT]
◊SELECT
MODEL 1
Hold while turning on transmitter
To Enter the Model Select Function
Press the DowN and SELECT keys simultaneously and turn the power switch ON to access the System Setup
Mode. Press the INCREASE or DECREASE key until the
Press the INCREASE or DECREASE key to select the desired model memory.
ModelMatch
The DX7 features patent pending ModelMatch technology that prevents operating a model using the wrong
memory. This feature can prevent stripped servo gears, broken linkages and even a crash due to trying to
operate/fly a model using the wrong memory.
How ModelMatch Works
Each individual model memory has its own embedded code that is transferred to the receiver during binding.
The receiver actually learns the code for the specific model memory that has been selected during binding and,
when bound, will only operate when that model memory is selected. If a different (non-matching) model memory
is selected, the receiver simply won't connect. This feature prevents trying to operate/fly a model using the
wrong model memory. The receiver can be re-programmed to operate with any other model memory by simply
re-binding with the transmitter programmed to the desired model memory.
Note: If the receiver is turned on and the matching model memory is not selected, the system
will not connect. Either select the matching model memory or rebind the receiver in the current
model memory to resume operation.
36
INCREASE and DECREASE key
ACRO DSM
MODEL SELECT screen appears.
SPEKTRUM DX7 • AIRCRAFT PROGRAMMING GUIDE
Model Select/Copy Function (continued)
Press to select
MODEL SELECT
[MODEL SELECT]
◊COPY
MODEL 1 EXTRA 300
MODEL 2
Hold while turning
on transmitter
To Enter the Copy Function
Press the DowN and SELECT keys simultaneously and turn the power switch ON to access the
System Setup Mode.
Press the UP or DowN key until Model Select appears on screen.
Press the SELECT button to enter the COPY SCREEN.
Press the INCREASE or DECREASE keys to select the model that you wish to copy the model to.
Press the CLEAR key to copy the model to the selected model memory.
Note: Be aware that the model you copy to will have its memory replaced with the new model's
memory, and the programming information for the model to be copied to will be erased.
SPEKTRUM DX7 • AIRCRAFT PROGRAMMING GUIDE
INCREASE and DECREASE key
ACRO DSM
ACRO DSM
Press to enter Press to copy
COPY screen selected model
37