Page 1
DX5C 5-Channel 2.4GHz DSMR ® Radio System Instruction Manual Bedienungsanleitung Manuel d’utilisation Manuale di istruzioni...
Page 2
WARNING AGAINST COUNTERFEIT PRODUCTS Always purchase from a Horizon Hobby, LLC authorized dealer to ensure authentic high-quality Spektrum product. Horizon Hobby, LLC disclaims all support and warranty with regards, but not limited to, compatibility and performance of counterfeit products or products claiming compatibility with DSM or Spektrum technology.
Compliance Information for the European Union ......23 Exponential ..................9 BOX CONTENTS ™ ® ® The DX5C transmitter is compatible with Spektrum DSMR and DSM2 Receivers. The DX5C is available with and without a receiver, they are both covered in this manual •...
ESC is plugged in and the throttle port will begin to operate in SMART Throttle mode. ESCs with SMART Throttle and IC series connectors can also pass along battery data from compatible Spektrum SMART batteries. The SR6100AT is compatible with the Spektrum Firma™ line of ESCs for SMART Throttle. NORMAL SERVO SIGNAL (PWM):...
E: Position of Steering (STR) trim F: Position of Throttle (THR) trim G: Position of Brake (BRK) trim H: Position of AUX 1 trim I: Position of AUX 2 trim J: Position of AUX 3 trim SPEKTRUM DX5• TRANSMITTER INSTRUCTION MANUAL...
4. Select Back Button to return to the MENU. To erase a character(s): 5. Press the Clear button while the character is selected. 6. Press the Clear button a second time to erase all characters to the right of the cursor. SPEKTRUM DX5• TRANSMITTER INSTRUCTION MANUAL...
2. Slide Up or Down to adjust the speed and press OK to save the selection. 3. Select a switch to activate/deactivate the function. If Switch ON is selected, the value will always be on for that function. SPEKTRUM DX5C • TRANSMITTER INSTRUCTION MANUAL...
The DX5C Timer function allows you to program a countdown timer and stop watch (count up timer) to display on the main screen. An alarm sounds when the programmed time is reached. You can program the timer to start using the assigned switch position or automatically when the throttle moves above a pre-programmed position. SPEKTRUM DX5• TRANSMITTER INSTRUCTION MANUAL...
NOTICE: Always remove the bind plug from the receiver when the bind Process is complete. Failure to do so will cause the receiver to enter bind mode the next time you power on the receiver. SPEKTRUM DX5C • TRANSMITTER INSTRUCTION MANUAL...
3. Select Switch; Inh will disable the mix, ON will activate the mix, or a switch can be assigned to turn the mix on and off. 4. Set Trim to Act or Inh (Default). When Trim is Active, adjustments to the Master trim carries over to the Slave channel. SPEKTRUM DX5• TRANSMITTER INSTRUCTION MANUAL...
Channel Assign allows for the assigning of a switch or trimmer as input to an AUX channel. Channel assign: 1. Select a channel to edit. Press OK to save the selection. 2. Slide Up/Down or toggle a switch/button to assign. 3. Press OK to save the selection. SPEKTRUM DX5C • TRANSMITTER INSTRUCTION MANUAL...
Alternatively telemetry values may be confi gured individually for display. For SMART Throttle to function you must have a compatible Spektrum ESC, and telemetry receiver to pair with your DX5C. Only certain Spektrum products include SMART technology compatibility, check your receiver and ESC manual for more information.
2. Press OK once to Activate/Inhibit. 3. Press OK to save the selection. About Displays the transmitter’s Serial Number. Start a user account at SpektrumRC.com and enter the serial number displayed on the About page register the transmitter. SPEKTRUM DX5C • TRANSMITTER INSTRUCTION MANUAL...
If the DX5C is updated, use the Validate All selection to ensure model settings are updated to be fully compatible with the new fi rmware. The Delete All selection will delete all model settings. SPEKTRUM DX5• TRANSMITTER INSTRUCTION MANUAL...
Page 16
OK to select it. Use the slide button to move the selected model to the position desired. Press OK when you have the model in the position desired. SPEKTRUM DX5C • TRANSMITTER INSTRUCTION MANUAL...
Turn the screw clockwise with a small Phillips screw driver to increase the steering tension. DATA PORT The data port gives drivers access to future updates. Registering the transmitter is neccesary for updates. Updates require the SPMA3065 updater cable (not included, PC required). SPEKTRUM DX5• TRANSMITTER INSTRUCTION MANUAL...
Page 18
DISABLING AVC TECHNOLOGY IN THE SR6100AT AVC may be disabled during binding. Binding is the process of linking the SR6100AT receiver to your Spektrum transmitter. The AVC features on the receiver can be enabled or disabled Power on the receiver and press the bind button 3 times quickly within during the binding process.
3S, so increasing throttle gain may be benefi cial. The default gain values in Spektrum transmitter AVC menus are set at 50. We recommend adjusting gain values 5 points at a time. Fine tune AVC TROUBLESHOOTING GUIDE the settings with smaller increments as desired performance is achieved.
Confi gure the telemetry screen in the transmitter telemetry menu SMART battery information is Not using a SMART Throttle compatible ESC A SMART compatible Spektrum ESC is required not coming through telemetry for SMART Battery data to be sent through telemetry...
Once assembly, setup or use of the days from notifi cation, after which it will be discarded. Product has been started, you must contact your local distributor or Horizon directly. This will enable Horizon to better answer your 10-15 SPEKTRUM DX5• TRANSMITTER INSTRUCTION MANUAL...
Web: HorizonHobby.com CAUTION: changes or modifi cations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. SPEKTRUM DX5C • TRANSMITTER INSTRUCTION MANUAL...
For more information about where you can drop off your waste equipment for recycling, please contact your local city offi ce, your household waste disposal service or where you purchased the product. SPEKTRUM DX5• TRANSMITTER INSTRUCTION MANUAL...
Page 24
DSM, DSM2, DSMR, AVC and Active Vehicle Control are trademarks or registered trademarks of Horizon Hobby, LLC. The Spektrum trademark is used with permission of Bachmann Industries, Inc. All other trademarks, service marks and logos are property of their respective owners.
Need help?
Do you have a question about the DSM DX5C and is the answer not in the manual?
Questions and answers