[Menu] - NEC VT800 User Manual

[MENU]

Selectng menu Color [COLOR SELECT]
You can choose between two options for menu color: color and monochrome.
Turnng On / Off Source Dsplay, message and Tme [SOURCE DISpLAY], [mESSAGE DISpLAY],
[TImE DISpLAY], [ID DISpLAY]
SOURCE DISPLAy ....... This option turns on or off input name display such as Computer 1, Computer 2, HDMI, Video, and No
MESSAGE DISPLAy ........ This option turns on or off messages. Even though selecting [OFF], the following message will appear.
TIME DISPLAy ............. This option turns on or off the current time displayed on the top left of the screen.
ID DISPLAy .................This option turns on or off the ID number which is displayed when the ID SET button on the remote
NOTE: The source and current time will be displayed for the time specified in [MENU DISPLAY TIME]. When [MANUAL] is se-
lected in [MENU DISPLAY TIME], the source and current time will be always displayed.
Selectng menu Dsplay Tme [mENU DISpLAY TImE]
This option allows you to select how long the projector waits after the last touch of a button to turn off the menu.
The preset choices are [MANUAL], [AUTO 5 SEC], [AUTO 15 SEC], and [AUTO 45 SEC]. The [AUTO 45 SEC] is
the factory preset.
Selectng a Color or Logo for background [bACKGROUND]
Use this feature to display a blue/black screen or logo when no signal is available. The default background is blue.
You can change the logo screen using the Viewer feature. (→ page 66)
NOTE: Your setting will not be affected even when [RESET] is done from the menu.
• When the BACKGROUND LOCK in [SECURITY SETTINGS] is turned on, the background cannot be changed.
Selectng Interval Tme for Flter message [FILTER mESSAGE]
This option allows you to select the time preference between displaying the message for cleaning the filters. Clean
the filter when you get the message "Please clean filter." (→ page 114)
Five options are available: Off, 100[H], 200[H], 500[H], 1000[H]
The default setting is 500[H].
NOTE: The message for filter cleaning will be displayed for one minute when the projector is turned on or off. To cancel the mes-
sage, press any button on the projector cabinet or the remote control.
NOTE: Your setting will not be affected even when [RESET] is done from the menu.
Settng Closed Capton [CLOSED CApTION]
This option sets several closed caption modes that allow text
to be superimposed on the projected image of Video or S-Video.
OFF ..............................This exits the closed caption mode.
CAPTION 1-4 ...............Text is superimposed.
TEXT 1-4 ......................Text is displayed in full screen.
Input to be displayed on the top right of the screen.
• "Projector is locked". When the projector security is unlocked, the message will disappear.
control is pressed.
9
6. Using On-Screen Menu