NEC VT800 User Manual page 59

Creatng or Addng a User
1. From the menu, select [SETUP] → [INSTALLATION (2)] → [SECURITy SETTINGS].
2. Select [ACCOUNT]-[SETTINGS].
the [aCCOUnt] setting screen will be displayed.
3. Select [CREATE].
the [aCCOUnt] create screen will be displayed.
4. Enter a user name, user type, and password.
• A user name must be 16 alphanumeric characters or less (case sensitive).
• User type has two options: [ADVANCED] and [BASIC].
• Use the software keyboard to enter a password in the NEW PASSWORD entry field.
a password must be 10 alphanumeric characters or less. if no password is set, the user is registered without a
password.
• After entering a password, enter the same password in [CONFIRM PASSWORD] input screen again.
• Make a note of your password.
5. Place a checkmark on [ENABLE].
the account will be made available.
6. Select [OK].
this will complete adding a user.
NOTE: Up to 12 user names can be created.
47
4. Convenient Features