Permobil K450 Owner's Manual page 105

Permobil K450 Owner´s manual
emergency operation of seat functions
If any of the electric seat functions cannot be operated in the normal way
because of a fault other than discharged batteries or a faulty adjustment
device, the function can be operated manually using the emergency operation
cable supplied.
Connector for con-
nection to charging
socket in the con-
trol panel
Connecting the emergency operation cable
m
warnInG
Emergency operation must only be used in
emergencies, and then with great care. When
the seat is operated in the emergency mode,
all safety functions in the control system are
bypassed. There is a risk of crushing and a risk
of damage to the wheelchair.
Never drive the wheelchair while using the
emergency operation cable at the same time.
1. Connect one end of the emergency
operation cable to the loading
socket of the control panel
(picture 1).
2. Remove two Allen screws at the
back of the wheelchair as shown in
picture 2. Lift off the bumper.
Emergency operation of seat functions
Connecting the emergency opera-
tion cable to the charging socket.
The Allen screws that attach the
105
Control lever
for emergency
operation
Connector for con-
nection bypassing
the control module
bumper.
1
2