Saving Your Own Settings; Changing The Sound Display; Muting The Sound - Pioneer XR-A790 Operating Instructions Manual

9
MUTE
DISPLAY MODE
JOG
AUDIO MODE
54
En
DISPLAY
JOG
VOLUME UP/DOWN
SET
SURROUND MODE
Using Sound Effects
• AUDIO/SURROUND mode
• EQUALIZER
•
ZOOM SURROUND
•
P.BASS
2 Use the JOG buttons to change the sound.

Saving your own settings

You can save up to six different combinations of Equalizer, Zoom
Surround, and P.Bass settings: three as Audio presets; three as
Surround presets.
Note: If the unit is unplugged from the power supply, settings
will remain intact for several days, after which they are lost.
1 Press AUDIO MODE or SURROUND MODE (front
panel) to select the preset mode.
2 Adjust the Equalizer, Zoom Surround and P.Bass to
your liking.
3 Press and hold the SET button for about three
seconds.
One of the user settings blinks in the display.
4 Use the JOG dial to select a preset number.
5 Press the SET again to save the settings.

Changing the sound display

You can choose between six different sound level displays.
1 Press DISPLAY until the front panel display shows DISP.
If you're using the front panel controls, press
2 Use the JOG dial/buttons to cycle through the six
different display types.
Stop on one you like.

Muting the sound

Use this function to temporarily mute all sound from the
speakers.
• Press MUTE (remote only) to mute the sound.
• Press again to restore the sound or adjust VOLUME
UP/DOWN.
.
DISPLAY MODE