Tuning In Stations; Improving Poor Fm Reception; Playing Cassette Tapes - Pioneer XR-A790 Operating Instructions Manual
Stereo cd cassette deck receiver
Hide thumbs
Also See for XR-A790:
- Service manual (24 pages) ,
- Operating instructions manual (75 pages)
Table of Contents
Advertisement
Available languages
Available languages
4
TUNER/BAND
MONO
7
SHIFT
TUNER BAND
MONO
En
Getting Started
Tuning in stations
The tuner can receive both FM and AM broadcasts, and lets you
memorize your favorite stations so you don’t have to manually
tune in every time you want to listen.
1 Press TUNER/BAND to switch to tuner mode.
Press repeatedly to switch between FM and AM.
2 Tune to a station.
There are three tuning modes —step, auto, and high-speed:
Step tuning: Press 1 or ¡ repeatedly to step through
the frequency in either direction (front panel:
– · 1 /4 and ¢ /¡ · + )
Auto tuning: Press and hold 1 or ¡ until the frequency
display starts to move, then release. The tuner will stop on the
next station it finds. Repeat to search for other stations.
High-speed tuning: Press and hold 1 or ¡ until the
frequency display starts to move rapidly. Keep the button held
down until you reach the frequency you want. If necessary, fine
tune the frequency using the step tuning method.
When you’re tuned into a station, the tuned indicator (
)
lights in the display.
If the station is FM stereo, the stereo indicator (
) lights.
Improving poor FM reception
If you’re listening to an FM station in stereo but the reception is
weak, you can improve the sound quality by switching to mono:
1 Press MONO (SHIFT & 7 on the remote).
The mono indicator (
) lights when the tuner is in mono
reception mode. Press again to switch back to auto-stereo mode
(the
indicator lights when receiving a stereo broadcast).
Playing cassette tapes
This unit has two tape decks; one exclusively for playback, the
other for both recording and playback. Other features include
auto-reverse, relay play, Dolby B Noise Reduction (XR-A790 only)
and auto tape select.
• Auto-reverse lets you play or record a tape without physically
taking it out and turning it over (tape deck II only).
• Using relay play, you can listen to two complete tapes back-to-
back for up to 3 hours of continuous music.
Page 30
- Quick Links:
- Specifications
- Especificaciones
Hide quick links:
Advertisement
Table of Contents
