Table of Contents
Advertisement
Page 4
9.
Quick Operating Instructions
9.1
Disc Mode
a) Install charged batteries.
b) Set the Mode switch to Disc.
c) Turn the Sovereign Elite On by turning the Volume control to the most
clockwise or "maximum" setting.
d) Turn the Threshold control in a clockwise direction until the tone
becomes "just" audible.
e) Set the Sensitivity control to Auto or at the maximum manual
setting without interference.
f) Set the Disc control to the white dot until you better understand its
appropriate settings.
g) Set the Notch control to the white dot until you better understand its
appropriate settings and start searching.
9.2
All Metals Mode
a) Install charged batteries.
b) Set the Mode switch to All Metals.
c) Turn the Sovereign Elite On by turning the Volume control to the most
clockwise or "maximum" setting.
d) Turn the Threshold control in a clockwise direction until the tone
becomes "just" audible.
e) Set the Sensitivity control to Auto or at the maximum manual setting
without interference and start searching.
The Minelab Sovereign Elite
Advertisement
Table of Contents
