Advertisement
Thermostat operation
The thermostat controls the heat output according to the
room temperature. This ensures that the heater will not
produce heat unnecessarily when the room is warm.
To set the temperature you require, turn the thermostat knob
fully clockwise to 'max' position. When the room is warm
enough, turn the knob back slowly until the thermostat just
clicks off. The heater will now maintain your selected
temperature.
WARNING: ALWAYS DISCONNECT FROM THE
POWER SUPPLY BEFORE ATTEMPTING ANY
MAINTENANCE
Thermal Safety Cutout
A thermal safety cut-out is incorporated in the heater to
prevent damage due to overheating.
This can happen if the heat outlet were restricted in any way.
The heater will switch on once the obstruction has been
removed and the heater has cooled. If the cut-out continues
to operate intermittently, the heater should be switched off
and a service agent contacted.
Lamp replacement
To gain access to the lamps, open the door, remove the fuel
effect by first lifting it up (See Fig. 5.
Fig. 5.
).Carefully rotate the lamp anti-clockwise until it
comes out of its holder (See Fig. 6)
Replace the defective lamp with a 230V, 40W max, E14 SES
clear candle lamp, rotating the lamp clockwise in the holder
until it is fully home. Do not over tighten.
When refitting the fuel effect ensure it sits in behind the front
metal edge at the control panel.
Fig.5
2
The product complies with the European Safety Standards EN60335-2-30 and the European Standard Electromagnetic Compatibility
(
EMC) EN55014, N60555-2 and EN60555-3 which cover the essential requirements of EEC Directives 73/23 and 9/336
Glen Dimplex UK Limited
Millbrook House
Grange Drive
Hedge End
Southampton
Hampshire. SO30 2DF
)and then out.(See
1
UK customer help line (8.00AM – 6.00PM Mon-Fri; 8.30AM-1.00PM Sat)
Customer Services:
Republic of Ireland
Cleaning & Maintainence
For general cleaning use a soft clean duster or, if necessary,
a damp cloth – never use abrasive cleaners
The fuel effect can be cleaned with a soft brush or vacuum
cleaner.
The glass viewing screen should be cleaned carefully with a
chamois leather. DO NOT use proprietary glass cleaners.
After Sales Service
Your product is guaranteed for one year from the date of
purchase.
We undertake to repair or exchange free of charge within this
period, any part, with the exception of a lamp bulb, found to
be defective due to a manufacturing fault.
All enquiries for service should be directed in the first
instance to the retailer from whom your product was
purchased.
Please do not initially return a faulty appliance or part of an
appliance to us as this may result in transit damage and/or
delay in providing service.
Let us know your difficulty quoting the model number and
series letter of the appliance. We will then take the
appropriate action.
Tel.
0870 7270101
Fax. 0870 7270102
e-mail www.customer.services@glendimplex.com
Tel.
01 8424833
Fig. 6
Advertisement
