Dimplex Americana AMR20R Installation And Operating Instructions page 3

Fig.3
Fig.4
Remote Control Oper
Warning: it takes some tim
respond to the transmitter
more than once within two seconds for correct
operation.
Manual or Remote Operation
Setting
Flame effect
Flame effect & 1kW heat setting
Flame effect & 2kW heat setting
To turn off any of the settings
To increase or decrease the brightness of the fuel effect use the buttons as shown in Fig. 4.
1.
2.
3.
Batteries
Off Button
On Button
Increase Brightness
Decrease Brightness
ation
e for the receiv er to
. Do not press th e buttons
Manual or Remote Operation
Press the 'ON' button once
Press the 'ON' button again
Press the 'ON' button again
Press the 'OFF' button once.
Slide open the battery cover on the back of the
remote control
Install three AAA batteries into the remote control
(see Fig. 3)
Replace the battery cover.
OFF
ON
Manual Controls
Note: The Standby Switch must be first
turned on to operate either the manual
or the remote controls.
Standby
Switch
Indication
Bottom Neon
Bottom & Middle Neon
All 3 Neon's