Set.time.&.Date; Set.date.format; Set.dual.time.differential; Set.time.of.day - Aeris F11 Operating Manual

SET TIME (& DATE)
Sequence >> Lead-in >> Date Format >> Hour Format >> Dual Time >> Time of Day >> Date.
set points remain as set until changed.
Set Time Lead-in, information includes (Fig. 12):
> Graphics Go To and SEt - t.
• S (< 2 sec) - to access Set Date Format.
• A (< 2 sec) - to step forward to Chrono Lead-in.
• M (< 2 sec) - to step back to Daily Alarm Lead-in.
• M (2 sec), or 2 minutes of no button action, will revert to Watch Main Time.
Set Date Format, information includes (Fig. 13):
Date Format establishes the position that the Month (M) digits are displayed relative to the Day (D) digits, on the left or right.
> Graphic M - D (or D - M) flashing.
> Graphic SEt.
• A or M (< 2 sec) - to toggle between M - D and D - M.
• S (< 2 sec) - to save setting and access Set Hour Format.
• S (2 sec) - to step back to Set Time Lead-in.
• M (2 sec), or 2 minutes of no button action, will revert to Watch Main Time.
Set Hour Format, information includes (Fig. 14):
Hour Format establishes number of hours displayed for Time of Day, 1 to 12 (AM and PM) or 1 to 24.
> Graphic 12HR (or 24HR) flashing.
> Graphic SEt.
• A or M (< 2 sec) - to toggle between 12HR and 24HR.
• S (< 2 sec) - to save setting and access Set Dual Time.
• S (2 sec) - to step back to Set Date Format.
• M (2 sec), or 2 minutes of no button action, will revert to Watch Main Time.
Set Dual Time Differential, information includes (Fig. 15):
This feature allows you to set an Hour based numeric time Differential ranging from - 23 through 0 to + 23 (hours). It provides a
second (Dual) Time equal to Watch Main Time +/- the Hours selected.
> Graphic OFF, or the Hour Differential (+ or - sign with numeric digits) flashing.
> Graphics diFF Hr and SEt, with DUAL icon.
• A (hold) - to scroll upward through the set points (8/sec) from - 23 through 0 to + 23 in increments of 1 (hour).
• A (< 2 sec) - to step upward through set points.
• M (< 2 sec) - to step back through set points.
• S (< 2 sec) - to save the setting and access Set Time.
• S (2 sec) - to step back to Set Hour Format.
• M (2 sec), or 2 minutes of no button action, will revert to Watch Main Time.
Set Time of Day, information includes (Fig. 16):
This setting changes Time of Day, which also changes Dual Time.
> Graphic SET.
> Time of Day (hr:min), Hour digits flashing, with AM (or PM) icon if 12 Hour Format, no icon if 24 Hour.
• A (hold) - to scroll upward through Hour set points (8/sec) from 12: AM to 11: PM, or 0: to 23: if 24 Hour Format, in
increments of 1: (hr).
• A (< 2 sec) - to step upward through Hour set points.
• M (< 2 sec) - to step back through set points.
• S (< 2 sec) - to save the Hour setting and flash the Minute digits (Fig. 30).
• S (2 sec) - to step back to Set Dual Time Differential.
• A (hold) - to scroll upward through Minute set points (8/sec) from :00 to :59 in increments of :01 (min).
• A (< 2 sec) - to step upward through Minute set points.
• M (< 2 sec) - to step back through set points.
• S (< 2 sec) - to save the Time setting and access Set Date.
• S (2 sec) - to step back to Set Hour.
• M (2 sec), or 2 minutes of no button action, will revert to Watch Main Time.
Set Date, information includes (Fig. 17):
Sequence is Year >> Month >> Day, regardless of Format set (position on the display).
> Graphic SET.
> Year digits, flashing.
> Month.Day (or Day.Month).
© 2002 Design, 2013 11
F11 OPERATING MANUAL
Fig. 12 - SET TIME
LEAD-IN
Fig. 13 - SET DATE
FORMAT
Fig. 14 - SET HOUR
FORMAT
Fig. 15 - SET DUAL TIME
(Hour Differential)
Fig. 16 - SET TIME
(hr:min)
Fig. 17 - SET DATE
(Year, Month, Day)
Watch Time/Date
can also be set using
the Settings Upload
feature of the ACI PC
Interface software.
Prior to shipment from
the factory, any error
of the Main Time
is determined and
corrected.
Doc. No. 12-7285-r01 (5/3/13)