Cleaning - Fagor “TOUCH CONTROL” Instruction Manual

IMPORTANT: If the vitroceramic surface breaks or you notice cracks in it, disconnect the
equipment. Call your Repair Service.
Clean the vitroceramic surface
frequently, when it is cool. Never use
abrasive products or pads. Clean
with a damp cloth and soapy water.
Once a week, clean thoroughly with
specific products that preserve and
protect vitroceramic hobs (Sample in
accessory bag). Scrape off hard stuck
dirt with the scraper (Included in
accessory bag).
The manufacturer recommends
VITRO-CLEN for cleaning and
conserving your vitro-ceramic hob.
If sugar (or sugary matter) or plasttic
is accidentally burnt on the hob,
remove at once with the scraper
while still hot. Otherwise they may
leave a pemanent mark.
Do not use the hob as a work surface.
Be particulary careful with dirt like
soil or dust from vegetables, cleaning
powders, etc. which may scratch the
surface when pans are slid over it.

CLEANING

69
INMEDIATELY