Use Of Containers - Fagor “TOUCH CONTROL” Instruction Manual

Most stainless steel, enamel, iron,
ceramic and copper pans can be used
on vitroceramic hobs.
Aluminium pans are not recommended
as they may stain the vitreous surface,
unless they have stainless-steel
covered bottoms.
Hotplates should not be switched on
without a pan on top. The base of the
pan should be flat and dry.
Pans that have been used on gas
cookers are not normally quite flat
and absorb heat badly.
Make sure that the diameter of the pan
is at least that of the hotplate.
Avoid scarping pans over the
vitroceramic surface, as it may
become scratched.
Always lift the pan.
Never use tinfoil or plastic containers.
They will melt and fuse permanently
with the vitroceramic surface.

USE OF CONTAINERS

68
SATINLESS STEEL
YES
ALUMINIUM
SATINLESS STEEL
ENAMEL
CERAMIC
COPPER
ALUMINIUM