Replacing The Disposal Bag - Makita VC4710 Operating Instructions Manual

6.2.5 Replacing the disposal
bag
Original Instruction
A A
B
D
C
E
A A
Makita VC4710
1. Be sure that the vacuum is
switched off and unplugged.
2. Open the retaining clamps
(A) and remove the upper
section of the vacuum clean-
er.
Removing the disposal bag:
3. Close the disposal bag with
string (B).
4. Carefully remove the dispo-
sal bag connection from the
inlet fitting (C).
5. Close the disposal bag con-
nection (D) with the slider.
6. Dispose of the disposal bag
in accordance with applicab-
le regulations.
Inserting the disposal bag:
7. Clean the tank.
8. Insert the disposal bag into
the tank.
9. Check that the ventilation
holes (E) remain inside the
tank.
10. Press the cardboard collar of
the new disposal bag firmly
onto the inlet fitting.
11. Fold the top edge of the
disposal bag over the rim of
the tank.
12. Attach the upper section of
the vacuum.
13. Close the retaining clamps
(A). Ensure that the retaining
clamps fit properly.
21