Advertisement
After installation, please refer to operation, maintenance and troubleshooting sections in this manual.
If your fan is packaged with a light kit or if you wish to install a separately purchased light kit,
STANDARD WIRING OPTION
*ATTACH BLUE WIRE
ONLY IF ATTACHING
LIGHT KIT WITH FAN
Secure with
twist-lock
wire
connectors
(included)
For pullchain controls, follow diagram above. Make
sure that all exposed wiring is secured inside wire
nuts. Note: Wires from house may vary in color and
may not include ground wire. After wiring is
conplete, gently push wires into junction box
7
with wire nuts pointing upward. Refer to point
3 of safety tips.
10
To gain access to the blade bracket
attachment holes remove the switch
12
housing cover by unscrewing the three
screws. Gently slide the cover off .
I
NSTALLATION
please refer to the insert sheet titled: L
WIRING OPTION WITH WALL SPEED CONTROL
*
For control of fan and optional light from
wall location, follow diagram above.
8
NOTE: A professional electrician is
recommended for this type of installation.
C
-B
OMBO
LADE
Combo-Blades feature two high quality
finishes on one blade. Select the one that
best complements your decor, or change
the style with just a flip of the blade.
Shipping
Stabilizer
Tab
Remove plastic shipping stabilizer tabs,if
present.The screws,washers and motor pads are
pre-installed to the blade holders.Attach blade
assembly to motor by tightening first screw
one turn,then tighten second screw
13
securely.Then,go back and tighten first
screw securely.
Note:
K
I
IGHT
IT
NSTALLATION
Wall
control
Attach blade brackets to blades using
the blade bracket screws and washers
11
provided.
Page 4 – Designer Supreme-English CUL
Raise the canopy up and align the two
holes in the canopy with the two holes in
9
the hanger bracket. Secure with two 5/
32 x 1/2" screws provided.
Fiber
Washers
After attaching blade; reinstall the
14
switch housing using the three screws
previously removed.
Advertisement
