Image 17.5 S IMTL49606.0 User Manual page 7

2. Have a second person orient the Base (48) as
shown.
Identify the Left Upright (31), which has a large
hole near the bend as shown.
Orient the Left Upright (31) as shown, and attach
it to the Base (48) with two Upright Bolts (27) and
two Upright Star Washers (39); do not tighten
the Upright Bolts yet.
3. Orient the Right Upright (36) as shown, and at-
tach it to the Base (48) with two Upright Bolts
(27) and two Upright Star Washers (39); do not
tighten the Upright Bolts yet.
4. Set the Base (48) near the front of the treadmill,
with the Power Cord (13) on the Hood (1) as
shown.
Cut the small tie (not shown) holding the Upright
Wire (28) in a bundle.
Wrap the strap around the Upright Wire (28) and
secure the strap using the included plastic tie.
Then, pull the opposite end of the strap until the
end of the Upright Wire is pulled through the
Right Upright (36).
2
Bend
48
Large Hole
3
Bend
36
4
13
7
31
39
39
48
39
39
36
36
28
Tie
48
27
27
27
Strap
28