Advertisement
Instruction book
Before using the iron for the first time,
please read the safety advice.
Safety advice
Read this instruction manual carefully
• The appliance should only be
before using the iron for the first time
connected to the power supply if its
and save for future reference. The
voltage and frequency match that
following advice will help you to use
indicated on the rating label.
your new iron safely.
• The appliance must only be connected
• This appliance is not intended for use
to an earthed wall socket.
by persons (including children) with
• The iron is not to be used if it has been
reduced physical, sensory or mental
dropped, if there are visible signs of
capabilities, or lack of experience
damage to the plug, mains cord or the
and knowledge, unless they have
appliance itself, or if it is leaking.
been given supervision or instruction
• If the appliance or the supply cord
concerning use of the appliance by a
is damaged, it must be replaced by
person responsible for their safety.
the manufacturer, its service agent or
• Children should be supervised to
similarly qualified person, in order to
ensure that they do not play with the
avoid hazard.
appliance.
• The iron must be used and rested on a
stable surface.
• Never leave the appliance unattended
while connected to the supply mains.
• The mains cable must not come into
contact with any hot parts of the
appliance.
• The appliance must be switched off
and the mains plug disconnected from
the socket outlet after each use, and
before cleaning and maintenance.
Getting Started
1. Before first use.
2. Filling the water tank.
Remove all adhesive and gently rub
Make sure the iron is unplugged.
with a dampened cloth before plugging
Set the variable steam knob (G) to position
in the iron.
"off" (for models ESI710/ESI730) or set the
We recommend that you rinse the
Temperature selector (K) to position 0 (for
water tank by operating the steam in a
model ESI730). Open the filling aperture
horizontal position away from your linen
cover. Using the beaker provided, pour
for one minute. When the iron is turned
water up to maximum level. Do not exceed
on for the first time, harmless vapours/
the maximum filling volume as indicated
odours may be emitted temporarily.
on the iron. Close the cover until it clicks.
This will cease quickly.
4
• The soleplate of the iron and nearby
surfaces can become extremely hot
and may cause burns if touched. Please
be especially careful when handling
the iron after use, or when re-filling the
water reservoir during use.
• The plug must be removed from the
socket outlet before the water reservoir
is filled with water.
• Do not immerse the iron in water or
any other liquid.
• Do not exceed the maximum filling
volume as indicated on the iron.
• The filling aperture must not be
opened during use.
• This appliance is intended for
household use only.
3. Type of water to be used:
This iron has been designed to use normal
tap water. If the tap water in your area is
very hard, you can fill the tank with 50%
tap water and 50% bottled distilled water.
Never use distilled water only. Never put
scented water, vinegar or ironing aids in
the water tank. This may cause brown
spitting and staining.
Using the iron
1. Plug the power cable into a
2. Adjust steam and temperature
power outlet.
settings for the models without the
Autosteam function (ESI710 / ESI730).
The thermostat indicator light (H) turns
on 'orange' . It will turn 'Green' once the
Set the Temperature selector (K) according
temperature selected is reached, meaning
to the fabric type by referring to the
the iron is ready to use.
settings table below. Then adjust the
steam output by setting the Variable
steam knob (G) according to the fabric
type by referring to the settings table.
Tips: Setting the right temperature:
Check the laundry care label for the
fabric type. If you select a lower
temperature setting whilst in use, wait
for a few minutes before ironing to make
sure the iron has cooled down. Setting the
right amount of steam: Always make sure
that the steam setting selected is suitable
for the temperature set and fabric type.
The iron is equipped with an anti-drip
device to prevent water from dripping
out of the soleplate when the temperature
selected is too low. For 'Dry ironing' set
the Variable steam knob (G) to the
position "off" .
3. Adjust the ironing settings for the
models equipped with the Autosteam
function (ESI750).
The Autosteam function regulates
the steam amount according to the
temperature set. Set the Temperature
selector (K) according to the fabric type
by referring to the table below, the steam
output will be automatically adjusted to
deliver the most effective combination for
the type of fabric selected.
Tips: Setting the right temperature: Check
the laundry care label for the fabric type.
If you select a lower temperature setting
whilst in use, wait for a few minutes
before ironing to make sure the iron has
cooled down.The iron is equipped with
an anti-drip device to prevent water from
dripping out of the soleplate when the
temperature selected is too low.
For 'Dry ironing' press down the On/off
steam control (G). To come back to steam
function, press again the button.
5
Hide quick links:
Advertisement
