Using The Iron; Ironing Chart - Electrolux ESI 7 Series Instructions For Use Manual

Using the iron

6. Using the Spray mist to remove
stubborn creases.
Ensure the water tank is at least 1/4 full.
Use the spray mist to pre-dampen fabrics
by pressing the spray button (H) several
times to release a fine mist.

Ironing chart

Fabric
Acrylic
Acetate
Nylon, Polyamide & Polyester
Rayon
Viscose
Silk
Wool & wool blends
Cotton blends
Cotton
Corduroy
Linen
Denim
For model ESI7504, the auto-steam system adjusts automatically the steam output and ensures you always get the ideal amount of
steam according to the temperature selected.
Please note: When set on the • program, the iron will not produce steam. The iron heats up faster than it cools down.
7. Turbo steam function.
Make sure the temperature selector (L) is set
on ••• or higher. To release a Turbo shot
of steam, press the Turbo steam button
(I) 1 or 2 times. Always wait for a few
seconds after each shot before pressing
the button again.
Temperature setting
•
•
•
•
•
•
••
••
•••
•••
••• to "max"
••• to "max" (For ESI7304)
JEANS (For ESI7504)
Steam setting Ironing recommendation
(For ESI7304)
off Dry iron on reverse side.
off Dry iron on reverse side while still damp or use
spray to dampen.
off Dry iron on reverse side while still damp or use
spray to dampen.
off Dry iron on reverse side of fabric.
off Dry iron using a dampen ironing cloth to
prevent shine marks.
Dry iron using a dampen ironing cloth to
off or
prevent shine marks.
Steam iron on reverse side or use ironing cloth.
Check garment label and follow manufacturer's
instructions. Use setting for the fibre requiring
lowest setting.
Dry iron on reverse side.
Steam iron on reverse side or use ironing cloth.
Steam iron on reverse side or use ironing cloth
to prevent shine marks, especially with dark
colours.
Use turbo steam function if needed.
8. Vertical steaming.
Vertical steam function is ideal for
steaming curtains, suits, dresses and
delicate fabrics. Hang item on a hanger
(always use a hanger, never use on a
garment while someone is wearing it),
hold the iron at a distance of 10 cm, set the
iron on ••• or higher and press the Turbo
steam button (I) 1 or 2 times. Always wait
for a few seconds after each shot before
pressing the button again. Never direct
steam at someone.
5