Image IMHS63100 User Manual
Image IMHS63100 User Manual

Image IMHS63100 User Manual

Hydrotherapy spa

Advertisement

Model No. IMHS63100
Serial No.
The serial number is on a plastic sign
inside the spa behind the access panel.
Record the serial number in the space
above.
Access Panel
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or if there are
missing parts, we will guarantee
complete satisfaction through
direct assistance from our factory.
TO AVOID UNNECESSARY
DELAYS, PLEASE CALL DIRECT
TO OUR TOLL-FREE CUSTOMER
HOT LINE. The trained techni-
cians on our customer hot line
will provide immediate assis-
tance, free of charge to you.
CUSTOMER HOT LINE:
1-877-897-7493
Mon.–Fri., 6 a.m.–6 p.m. MST
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
USER'S MANUAL
Visit our website at
www.workoutwarehouse.com
new products, prizes,
fitness tips, and much more!
®

Advertisement

Table of Contents
loading

Summary of Contents for Image IMHS63100

  • Page 1 Model No. IMHS63100 Serial No. The serial number is on a plastic sign inside the spa behind the access panel. Record the serial number in the space above. Access Panel QUESTIONS? As a manufacturer, we are com- mitted to providing complete customer satisfaction.
  • Page 2: Table Of Contents

    Whenever the spa is moved, the sign must also be moved and reposted near the spa. If the sign becomes lost or illegible, call our toll-free Customer Hot Line at 1-877-897-7493 to obtain a replacement sign. Post the sign as described above. IMAGE ® is a registered trademark of ICON Health & Fitness, Inc.
  • Page 3: Important Safety Instructions

    Important Safety Instructions WARNING: To reduce the risk of drowning, electric shock, or serious injury, read the fol- lowing important precautions before using the hydrotherapy spa. READ AND FOLLOW ALL INSTRUCTIONS 1. It is the responsibility of the owner to ensure that all users of the hydrotherapy spa are adequately informed of all precautions.
  • Page 4 The effects of hyperthermia include failure to per- ceive heat; failure to recognize the need to exit the spa or hot tub; unawareness of impending hazard; fetal damage in pregnant women; physical inability to exit the spa or hot tub and unconsciousness resulting in danger of drowning.
  • Page 5: Save These Instructions

    35. WARNING: The spa jets produce a stream of water with relatively high pressure. Prolonged exposure of a localized area of the body may cause bruises to the skin. 36. The included warning sign must be posted where all users of the hydrotherapy spa can see and read it.
  • Page 6: Before You Begin

    To help us assist you, please mention the product model number and serial number when calling. The model number is IMHS63100. The serial number can be found on a decal attached to the access panel inside the spa (see the front cover of this manual).
  • Page 7: Choosing A Location For The Hydrotherapy Spa

    Choosing a Location for the Hydrotherapy Spa There are many factors to consider when choosing a location to set up the hydrotherapy spa. These factors vary depending on whether you plan to use the spa inside or outside. We have listed several factors you may wish to consider as you decide where to set up the spa.
  • Page 8: Assembly

    Assembly Before beginning assembly, carefully read the following information and instructions: • Place all parts in a cleared area and remove the packing materials from the spa shell. Do not dis- pose of the packing materials until assembly is completed and the spa is operating. •...
  • Page 9 3. Refer to the drawing on page 6 and locate the heater access opening. Locate the two indicated gate valves inside the heater access opening. Make sure that the gate valves are open and that the locking clips are snapped onto the stems of the gate valves (refer to the inset drawing in step 2 on page 8).
  • Page 10: Using The Hydrotherapy Spa

    Using the Hydrotherapy Spa The hydrotherapy spa is designed to seat five adults. The spa holds 295 gallons of water and offers a heat- ing system (80°F to 104°F), a filtration system, and adjustable hydrotherapy jets. Follow the guidelines below to use and maintain the spa for your long-term enjoyment.
  • Page 11: Spa Shell Diagram

    Spa Shell Diagram A. The eight adjustable push/pull jets allow you to direct their water flow and can be closed and opened with a push or a pull on their nozzles. Water pressure to the other hydrotherapy jets can be increased by closing the adjustable push/pull jets.
  • Page 12: Using The Controls

    Using the Controls Air Control 1 Refer to the diagram above. The function of each control is explained below: Display Invert: Turns the Display 180°, allowing it to be read from the inside or the outside of the spa. Air Control 1: Determines the amount of air flowing through the hydrotherapy jets labeled A (above).
  • Page 13: Maintenance

    Maintenance The hydrotherapy spa is designed to provide years of enjoyment. Please follow the guidelines below to properly maintain your spa. MAINTENANCE SCHEDULE Daily • Check the water level and refill the spa to the level shown in step 5 on page 9. •...
  • Page 14 WATER CHEMISTRY The hydrotherapy spa comes with a starter chemical pack for maintaining the water in the spa. (See TEST- ING AND TREATING THE WATER on page 10.) Additional chemicals can be purchased at a pool and spa supply store. CAUTION: The chemicals used to maintain the pH balance of the water and to sanitize the water can be dangerous.
  • Page 15 To drain the hydrotherapy spa, follow the steps below: 1. Using the console, adjust the temperature to the lowest setting. 2. Shut off the power to the spa, at the circuit breaker or GFCI. 3. Remove the pump access panel from the spa. 4.
  • Page 16: Trouble-Shooting

    Trouble-shooting Most problems can be solved by following the simple steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, call our Customer Service Department toll-free at 1-877-897-7493, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time. 1.
  • Page 17 10. SYMPTOM: THE SPA JET UNIT CONTINUES TO RUN AFTER IT HAS BEEN SHUT OFF a. To turn the main jets off, press the pump button once. NOTE: If the actual spa water tempera- ture is below the set temperature, or if the spa is running a filter cycle, the heater pump/motor will not shut off.
  • Page 18: Part List

    Part List—Model No. IMHS63100 Key No. Qty. Description Thermometer Fitting Long Access Panel Adjustable Whirlpool Jet Heater Pump/Motor Short Access Panel Heater Pump/Motor O-ring 1/4” x 1 1/2” Machine Screw Filter Cover #10 x 1 3/4” Sheet Metal Screw Seven-port Jet...
  • Page 19: Exploded Drawing

    Exploded Drawing—Model No. IMHS63100 R0700A...
  • Page 20: Ordering Replacement Parts

    Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). To help us assist you, please be pre- pared to give the following information when calling: 1. The MODEL NUMBER of the product (IMHS63100) 2. The NAME of the product (IMAGE 3.

This manual is also suitable for:

Renew 631

Table of Contents