Table of Contents
Advertisement
Quick Links
Model No. IMHS81592
Serial No.
Write the serial number in the
space above for reference.
Serial
Number
Decal
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or if there are
missing parts, we will guarantee
complete satisfaction through
direct assistance from our factory.
TO AVOID UNNECESSARY
DELAYS, PLEASE CALL DIRECT
TO OUR TOLL-FREE CUSTOMER
HOT LINE. The trained techni-
cians on our customer hot line
will provide immediate assis-
tance, free of charge to you.
CUSTOMER HOT LINE:
1-800-999-3756
Mon.ÐFri., 6 a.m.Ð6 p.m. MST
CAUTION
Read all precautions and
instructions in this manual
before using this equipment.
Save this manual for reference.
USERÕS MANUAL
Visit our website at
www.imagefitness.com
new products, prizes,
fitness tips, and much more!
¨
Advertisement
Table of Contents
Related Manuals for Image 815inflatable
Summary of Contents for Image 815inflatable
- Page 1 ¨ Model No. IMHS81592 Serial No. USERÕS MANUAL Write the serial number in the space above for reference. Serial Number Decal QUESTIONS? As a manufacturer, we are com- mitted to providing complete customer satisfaction. If you have questions, or if there are missing parts, we will guarantee complete satisfaction through direct assistance from our factory.
-
Page 2: Table Of Contents
Table of Contents WARNING DECAL PLACEMENT ............2 IMPORTANT SAFETY INSTRUCTIONS . -
Page 3: Important Safety Instructions
Important Safety Instructions WARNING: To reduce the risk of drowning, electric shock, or serious injury, read the following important precautions before using the RENEW 815. READ AND FOLLOW ALL INSTRUCTIONS 1. It is the responsibility of the owner to ensure RENEW 815 when it is not in use. - Page 4 ation. If the spa jet unit continues to run after 815 if the water temperature is above 100¡F the ÒtestÓ button is pressed, then the GFCI is (38¡C); the unborn child could be seriously damaged. Do not use the RENEW 815 until harmed.
-
Page 5: Before You Begin
Before You Begin Thank you for selecting the IMAGE ¨ RENEW 815. The Department toll-free at 1-800-999-3756, Monday innovative RENEW 815 offers the features and quality through Friday, 6 a.m. until 6 p.m. Mountain Time of a traditional hot tub at an affordable price. Best of (excluding holidays). -
Page 6: Choosing A Location For The Hydrotherapy Spa
Choosing a Location for the Hydrotherapy Spa There are many factors to consider when choosing a location to set up the RENEW 815. These factors vary depending on whether you use the RENEW 815 inside or outside. We have listed several factors you may wish to consider as you decide where you want to use the RENEW 815. -
Page 7: Assembly
Assembly Before beginning assembly, carefully read the ¥ Assembly requires only the included air pump. following information and instructions: Note: The included flat wrench is not required for assembly. The flat wrench is used to remove the ¥ Place all parts in a cleared area and remove the filter cap (see pages 10 and 11). - Page 8 2. Orient the dry side jet pack (A) as shown and place it near the three holes in the Inflatable Liner (29). Small Hole Slide the Temperature Probe Gasket (46) over the connector threads on the Temperature Probe Receptacle Assembly (30). Insert the wire (not shown) through the small hole in the Inflatable Liner (29) and then push the Temperature Probe Assembly into the hole.
- Page 9 5. Attach the nozzle on the air pump to the valve on Air Valve the floor of the Inflatable Liner (29). Use the air pump to fill the bottom of the Inflatable Liner with air. Be extremely careful not to puncture the Liner. You will need to operate the pump by hand for this step.
-
Page 10: Using The Hydrotherapy Spa
Using the Hydrotherapy Spa The RENEW 815 spa is designed to be used by up to Grounded circuit three adults. The spa holds 268 gallons of water and capable of carrying offers an automatic, programmable heating and filtra- 15 or more amps tion system (70¡F to 104¡F). - Page 11 Use the included test strips to check the pH of the Always keep the buckles locked when the spa is water. Refer to the instructions on the test strip pack- not in use. Keep the keys in a safe place, out of aging to see how to use the test strips.
- Page 12 ties. Also, if the water temperature falls below 40¡F, pack should also be drained if the RENEW 815 will be the pump will begin circulating and heating the water stored for more than thirty days, or if it may be to prevent the water from freezing.
-
Page 13: Maintenance
Maintenance CLEANING THE INFLATABLE SPA LINER 4. Keep all chemicals out of the reach of chil- dren and pets. The liner should be cleaned with a mild soap solution. 5. Keep all containers closed tightly when not Do not use solvents. The liner should always be clean in use. -
Page 14: Trouble-Shooting
Trouble-shooting Most problems can be solved by following the simple steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, call our Customer Service Department toll-free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time. 1. - Page 15 9. SYMPTOM: THE SPA JET UNIT CAVITATES allow the spa to maintain a safe temperature DURING USE by running in automatic mode. Allowing the spa jet unit to freeze will damage the unit. If a. Adjust the water level. This usually occurs only you do not want to use the spa during the when the water level is low.
- Page 16 Remove this Part List/Exploded Drawing from the manual. Save this Part List/Exploded Drawing and the manual for future reference. Protect Your Spa Investment With the help of customer input, we have deter- water absorbs heat very slowly, the effect is that it will mined key information you need to be aware of to take 1 to 3 days (depending on the room temperature) get the most enjoyment from your spa.
- Page 17 PART LISTÑModel No. IMHS81591 R0600A Key No. Qty. Description Key No. Qty. Description Pressure Switch Wet Side Nut Pump Frame Wet Side Gasket Temperature Probe High Limit Rubber Foot Inflatable Cover Tek Screw #8 x 1/2Ó Screw Wet Side Shell Assembly Cover Panel Ground Wire Overlay...
-
Page 19: Ordering Replacement Parts
Ordering Replacement Parts To order replacement parts, simply call our Customer Service Department toll-free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). To help us assist you, please be pre- pared to give the following information when calling: ¥...