Lenovo Edge 11 Hardware Maintenance Manual page 97

Table 23. Removal steps of LCD unit
When installing:
• Make sure that you route the cables firmly as shown in this figure.
• When you route the cables, make sure that they are not subjected to any tension. Tension could cause the cables
to be damaged by the cable guides, or a wire to be broken.
Step Screw (quantity)
3
M2.5 × 4 mm, wafer-head, nylon-coated (4)
Torque
Color
Silver 0.181 Nm
(1.85 kgfcm)
.
Chapter 8 Removing and replacing a FRU
89