1040 DIMM
For access, remove these FRUs in order:
•
"1010 Battery pack" on page 65
•
"1020 Bottom door" on page 66
Table 11. Removal steps of DIMM
Note: If the computer you are servicing has two DIMM slots and only one DIMM is used, the card must be installed
a
in SLOT-0 (
), but not in SLOT-1 (
When installing: Insert the notched end of the DIMM into the socket. Press the DIMM firmly, and pivot it until it
snaps into the place. Make sure that it is firmly fixed in the slot and does not move easily.
b
a
1
b
). Some models only have one DIMM slot.
1
2
.
Chapter 8
Removing and replacing a FRU
69