Channel Switching; Display - EverFocus PARAGON Series Instruction Manual

By front panel: Press any channel key to bring that channel to full screen mode.

4.8 CHANNEL SWITCHING

Use this function to change channel position
1. Select one camera
2. Press Channel button
3. Click on the channel number you wish to switch on channel bar. The display of channel will be switched.
EX: Select camera1 and enter Channel menu and choose "2", than camera1 will show on position of
camera2, camera2 will show on position of camera1

4.9 DISPLAY

1. Press Display button
2. Press once to show camera information. Please see the following table for status representation.
Recording
Alarm
3. Press again to show status information. Please see the following table for status representation.
Alarm
HD temp. too high
Record in HD2
.
on menu by using mouse or press "Display" button on the front panel.
Playback Fast forward
Motion Video loss
Control call monitor
Audio 1~16
Monitor 1 status
Motion
Seq. Video loss
Fast backward
Express copy
Event
New firmware
34
Back pause
Audio out
Fan failure HD failure
No network Record in HD1