Schedule - EverFocus PARAGON Series Instruction Manual

Month/weekday: Repeats recording on a specific day of the month/week.
Details: Specifies the date to be recorded.
Prev: Previous Page (30 Holidays Total)
Next: Next Page (30 Holidays Total)

5.6.3 Schedule

Camera: Select a number to change the schedule for that camera. Each camera can be set on a 24 hour
time block for Holiday (Hol), Other (Oth), Sunday (Sun), Monday (Mon), Tuesday (Tue), Wednesday (Wed),
Thursday (Thu), Friday (Fri), or Saturday (Sat).
Time Bar: The time bar uses three different colors to distinguish each recoding mode.
Gray (No Rec): No recording during this time block.
Orange (E): Only events are recorded during this time block.
Blue (N+E): (Default) Normal and event recording during this time block.
To Set Schedule using Mouse
1. Click on desired start time block (no numbers on it) on a time bar. At this time, the selected block will
be highlighted in blue frame and the selected time bar will be highlighted by red frame.
There are 24 blocks on the time bar representing 24 hours respectively. Set a schedule start time by
clicking on a desired start time block on a time bar and clicking again to confirm it. At this time, the
selected block and all following blocks will turn gray, which means this gray timezone has been set to
the recording mode of gray(No Rec).
Figure 5-22 Schedule Menu-Schedule
70