Advertisement
Page 4 SB-2-582
GTI-33 Baffle Seal Replacement (26)
1. Remove fluid tip (7).
2. Remove baffle (27).
3. Remove seal (26) from baffle.
4. Assemble seal to baffle with angled
side up as shown at right.
NOTE
The seal should be a tight fit
on the baffle. If it is a loose fit
on the baffle, assure that it is
assembled with the angled
side up.
ACCESSORIES
42884-214-K5 3/8"
WR-103 WRENCH
42884-215-K10 5/8"
CLEANING BRUSHES
These brushes are help-
Contains all necessary
ful in cleaning threads
tip, hose and nut sizes
and recesses of gun
used on or with gun.
body.
Millennium 3000
Twin Cartridge,
Whirlwind™
Paint Spray
In-Line Air Filter
Respirator
NIOSH-Certified
(TC-84A-1623) for
respiratory protec-
tion in atmospheres
Removes water,
not immediately
oil, and debris
dangerous to life.
from the air line.
WARRANTY
This product is covered by DeVilbiss' 1 Year Limited Warranty.
DeVilbiss Worldwide Sales and Service Listing: www.devilbiss.com
Industrial Finishing
DeVilbiss has authorized distributors throughout the world. For
technical assistance or the distributor nearest you, see listing below.
U.S./Canada Technical Service Office:
195 Internationale Blvd., Glendale Heights, IL 60139
Toll-Free Telephone: 1-888-992-4657 (U.S.A. and Canada only)
Toll-Free Fax: 1-800-368-8401
5. Install baffle on gun.
6. Install fluid tip (7) and tighten to 12-15
ft-lbs.
The seal is designed to be a tight fit
on the baffle. The seal should be
able to be removed using your
fingers. If you are unable to re-
move the seal using your fingers,
insert a small screwdriver be-
tween the outer lip and the back of
the baffle and pry the seal off.
HD-503
SOLVENT SAVER™
GUN/HOSE CLEANER
2 qt. Hose/Gun Cleaner
used to clean the inside
of hose, fluid passage-
ways of gun and other
paint equipment.
HAF-507
KB-555 Alum. &
KB-545-SS
Stainless Steel 2 Qt.
Pressure Feed Cups
Includes a 0-30 psi
gauge.
NOTE
Pry here if
necessary
SPRAY GUN LUBE
SSL-10-K12
(2 oz. bottle)
Compatible with all paint
materials: contains no sili-
cone or petroleum distil-
lates to contaminate paint
An MSDS Sheet is avail-
able upon request.
29-3100 Scrubs
®
Hand Cleaner Towels
Scrubs
®
are a pre-
moistened hand
cleaner towel for
painters, body men
and mechanics that
go where you go
and no water is
needed.
2/08 ©2008
ANGLED SIDE
SEAL
THICK SIDE
BAFFLE
HAV-500 OR
HARG-510 AIR
HAV-501
REGULATOR
Adjusting Valve
(HAV-501 SHOWN)
Use to maintain nearly
constant outlet pressure
HAV-500 does not have
despite changes in inlet
pressure gauge. Use to
pressure and down-
control air usage at gun.
stream flow.
Inc. All rights reserved. Printed in U.S.A.
Advertisement
