18. An outside antenna system should not be located in
the vicinity of overhead power lines or other electric light
or power circuits, or where it can fall into such power lines
or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such
power lines or circuits, as contact with them might be fatal.
19. Do not overload wall outlets, extension cords, or inte-
gral convenience receptacles, as this can result in a risk of
fire or electric shock.
20. Never push objects of any kind into this product
through openings, as they may touch dangerous voltage
points or short-out parts that could result in a fire or elec-
tric shock. Never spill liquid of any kind on the product.
21. The apparatus shall not be exposed to dripping or
splashing, and no objects filled with liquids, such as vases,
shall be placed on the apparatus.
22. Do not attempt to service this product yourself, as
opening or removing covers may expose you to danger-
ous voltage or other hazards. Refer all servicing to qualified
Example of Antenna Grounding as per
National Electrical Code ANSI/NFPA 70
23. When replacement parts are required, be sure the
service tech-nician has used replacement parts specified
by the manufacturer or that have the same characteristics
as the original part. Unauthorized substitutions may result
in fire, electric shock or other hazards.
24. Upon completion of any service or repairs to this
product, ask the service technician to perform safety
checks to determine that the product is in proper operat-
25. The product should be mounted to a wall or ceiling
only as recommended by the manufacturer.
Note to CATV system installer:
This reminder is provided to call the CATV system
installer's attention to Article 820-22 of the NEC that pro-
vides guidelines for proper grounding and, in particular,
specifies that the cable ground shall be connected to the
grounding system of the building, as close to the point of
cable entry as practical.
Part No. HCGUL1492/6500 04/2004 EN