Option C - Priority Mode Configuration - Cisco 3G MicroCell User Manual

Option C
UsethisoptionifyouhaveamodemandaWi-Firouterandwanttoprioritizeyour3GMicroCellconnection
because other Internet use impacts the 3G MicroCell performance.
1
Open
Port
Wi-Fi Router
Remove the sticker that covers the rear panel of your 3G MicroCell.
To ensure success, it is important to complete the steps below in order.
Thissetupprioritizes3GMicroCellconnectionsovercomputerconnections.
1. Connect one end of an
to the port labeled
2. Take the yellow Ethernet cable
'Ethernet' on the 3G MicroCell and the other end to the
3. Now, turn off power
equipment in the following order:
a) Modem
b) 3G MicroCell (Connect one end of the
and connect the other end to an available
c) Wi-Fi Router
Priority Mode Configuration
AT&T 3G MicroCell™
1
Ethernet cable to your
'Computer' on your 3G MicroCell.
that came with your 3G MicroCell and connect one end to the yellow port labeled
to your current internet equipment.
AC Power Adapter
2
3
Power
Internet port on your Wi-Fi router
Ethernet port on your
Wait one minute, then
to the connector labeled
AC outlet.)
Ethernet Cable
(Included)
2
and the other end of the cable
modem.
turn on power to your Internet
'Power' on the 3G MicroCell
Advance to page 12.
Open Port
Modem
11