Video Streams Specification - Gadspot N600E User Manual

Video Streams Specification

The availabilities
1. Each stream can be switched to either H.264 or MJPEG mode.
2. Each steam can be configured to either CBR or VBR mode.
3. Stream1 (main stream) is available from all the resolutions listed.
4. The maximum resolution setting for Stream2 is 640x480.
5. Stream3 is fixed in 320x240.
6. The maximum frame rate for transferring 1600x1200 is 15fps. Others can reach up to 30fps.
Encoding Mode
H.264 / MJPEG
Transferring Mode
CBR / VBR
Resolution @ Max. FPS
1600x1200@15
1280x720@30
800x600@30
640x480@30
320x240@30
Dependency
1. Max. FPS dependency: when Stream1 is set to 1600x1200, the maximum frame rate is 15fps. Accordingly,
both Stream2 and Steram3 can be configured with the frame rate from 5 to 15 fps.
2. Resolution dependency: The maximum resolution of Stream2 is depending on the resolution setting of
Stream1. When Stream1 is set to 320x240, Stream 2 is limited in 320x240.
3. Frame rate independent: Frame rate setting for each stream can be independent, for instance, Stream2 can
be set 15fps and Stream3 is 30fps while Stream1 (1280x720 or below) is set to 5fps.
STREAM1
1600x1200, 5~15 fps
1280x720, 5~30 fps
800x600, 5~30 fps
640x480, 5~30 fps
320x240, 5~30 fps
Note the resolution setting must follow the sequence: Stream1 ≧ Stream2 ≧ Stream3.
STREAM1 STREAM2
V V
V V
V
V
V
V V
V V
STREAM2 STREAM3
640x480 320x240 320x240 (fixed)
5~15 fps
5~30 fps
5~30 fps
STREAM3
V
V
V
5~15 fps
5~30 fps
53