Event Configuration
The Event Configuration is to assign the actions responding to the specified events (Trigger Conditions).
The table lists the configured events. Click on "Add..." or choose an event from the list to expend the panel
for detail configurations. "Remove" is to delete a selected event.
1
4
5
1. To add an event trigger, click on [Add] and setup panel will be expanded.
2. Give a name to this event.
3. Set the time interval between each trigger.
4. Set the time period for the trigger. Choose "Always" or "During time between" or "Never".
During time frame: Choose a day and the starting time then configure the duration time (168hrs = 24x7).
For example if duration time is set to 168(hrs), it is the same as choosing "Always"
Trigger types (conditions):
Motion Detection: The configured detection area(s) for motion events.
2
3
6
28