Panasonic Viera TC-P55VT30 Owner's Manual page 43

Wireless network (Wireless network setting)
Set only if specified by the provider. It is not required for normal household use.
•
C
(J)
:J
<0
Z
CD
~
o ....,
7'
(J)
CD
:<
@'
(J)
IIJ.~
~~~
~~~
~
• Proxy address
This is the address of the relay server that is connected
to the target server instead of the browser and sends
data to the browser. Setting is only required if specified
by the provider.
• Proxy port
This number is specified by the provider together with the
Proxy address.
1 ...
I P_ad_dr_es_s_ _ ....I
• Manual setting
CD
Select "IP/ONS setting mode" and set to "Manual"
®
Select the item and press OK
@ Check the specifications of the broadband router and
enter each IP address.
Or Enter each IP address as was specified by the
provider
IP addre5slDNS settings
tPse:tttttOtI'IO<tit
IPadt1tMe 192.168.0.5
SubtlDttrl.Bfl
255.255.255.0
Qt,taultgatel/UlY 192.166,0.254
ONS
semng
mctde Automatic
ON$ 192.168.0.20
~
a4.drht. 19216805
$Ubntt
It\flik 255 255 255 0
OIlfaultgat-away '9216802~
l)fW6~tlJttt:m<HH Automatic
ON& 192168020
•
]I
o
II
WPS (Wi·Fi Protected Setup using push bullon)
WPStWi.fiPtoteeted5elUp
using PlNnumber)
Manual~~ings
Menu
Wireless network
Please choose connection method:
Search for Wireless
.rll~twotks
®
Select item and press OK
Proxy setting
CD
Select "Proxy setting"
I
I
I I
• 1i iI
The' acquired
~ddress
is displayed.
®
Each IP address is acquired automatically
If you are using a broadband router, IP automatic
acquisition in OHCP can be used under normal
circumstances. If you are not sure, check with the person
who installed the equipment, or check the instructions for
each device.
• When connecting by 11 n (5 GHz), select "AES" as the
Encryption type for the wireless LAN.
IP address/DNS settings
*
Wi-Fi Protected Setup is an easy setting of the Wi-Fi
Alliance's certification
• For more details on setting of an Access point, please
refer to operating manual for the Access point.
CD
Select "IP/ONS setting mode" and set to
" Automatic"
(When IPIONS automatic acquisition in OHCP can be
used)
• Sets I Changes wireless network setting
CD
Press "Wireless network" and display setting screen
®
Follow the directions on screen to complete the setting
Search for Wireless networks:
Select an access point from the ones searched for
automatically, and configure the settings as instructed
on the screen.
WPS (Wi-Fi Protected Setup* using push button):
You can connect the Access point to press the
buttons.
WPS (Wi-Fi Protected Setup using PIN number):
Set the PIN code that is displayed on the TV on the
Access point.
Manual settings:
Manually set SSIO, Security type, and Encryption type
to match the settings of the Access point to which to
connect.
@ Enter address or port number and press OK
• Entering characters (p. 21)
43