First Time Setup - Panasonic Viera TC-P55VT30 Owner's Manual

First Time Setup
The first time setup screen is displayed only when the TV is turned on for the first time after the power cord
is inserted into a wall outlet and when "Auto power on" (p. 55) is set to "No".
••
- . "
a. _.
(1)-'
:::J~
ro+ _. -l
-<' _.
-·3
c5CD
aU>
os.
:::Jc
~"O
o
en
You are selecting the store demonstrallon mode
Yes
~
If (OiJ <;.(>Iect Yes "\e picture mode
N
I e;;ula I, reset
'0
Ii
va
and a FlclL.fl~' Re'resn messaqe ;VlI CE' j~r.:layec en the
sc'ee,
• Please confirm your selection (Home Use) before pressing OK button .
• If you select "Store Demonstration" by mistake in @,
confirmation screen will be displayed.
(@)GJselect
~~@OK
Turn the TV On with the POWER button
(TV) (Remote)
POWER
@ Select your viewing mode
(Be sure to select "Home use")
G0.:.K ..
)~G)select
~~@OK
it
Select "No" and return to previous screen @
• If you select "Yes", Screen enters the store demonstration mode.
To display the "Set viewing mode" screen again as shown above and
select "Home Use", do one of the following:
• Press and hold down the front POWER button for at least five seconds.
• Unplug power cord for 30 seconds and plug it again.
®
Select your country
~J;~I
POWER
~
or
r
j
fl
~
Configure your viewing mode
~----
CD
Select your language
( Note)
it
If you use any other step other than
@
then turn the TV off, or if you used
the EXIT button to quit before completing the settings, the next time you turn
the TV on, "First time setup" will not be automatically displayed.
• The settings up to that point are saved .
• You can start "First time setup". (p. 55)
.. Language, ANT/Cable setup, Input labels, and Clock can also be changed
in the Settings Menu. (p. 55)
15