Yamaha TW200B Owner's Manual page 33

ITEM
Throttle grip
Control cables
Drive chain
Wheels and tires
Shift pedal
Brake pedal
Brake and clutch levers
Sidestand
Chassis fasteners
Instruments, lights, signals
and switches
Sidestand switch
Battery
FOR YOUR SAFETY – PRE-OPERATION CHECKS
• Make sure that operation is smooth.
• Check throttle grip free play.
• If necessary, have Yamaha dealer adjust throttle grip free play and lubricate
cable and grip housing.
• Make sure that operation is smooth.
• Lubricate if necessary.
• Check chain slack.
• Adjust if necessary.
• Check chain condition.
• Lubricate if necessary.
• Check for damage.
• Check tire condition and tread depth.
• Check air pressure.
• Correct if necessary.
• Make sure that operation is smooth.
• Correct if necessary.
• Make sure that operation is smooth.
• Lubricate pedal pivoting point if necessary.
• Make sure that operation is smooth.
• Lubricate lever pivoting points if necessary.
• Make sure that operation is smooth.
• Lubricate pivot if necessary.
• Make sure that all nuts, bolts and screws are properly tightened.
• Tighten if necessary.
• Check operation.
• Correct if necessary.
• Check operation of ignition circuit cut-off system.
• If system is not working correctly, have Yamaha dealer check vehicle.
• Check fluid level.
• Fill with distilled water if necessary.
CHECKS
5-2
PAGE
7-17, 7-28
7-27
2
7-26, 7-27
3
4
7-18, 7-20
5
7-23
7-29
6
7-28
7
7-29
— 8
—
9
4-10
7-31