5. Setup
1) System requirements
・ Windows ® 98 or Me, 2000, XP
・ IBM-compatible PC/AT with Pentium or higher processor
・ CD-ROM drive
・ 3.5-inch 2HD diskette drive
・ USB port
・ 40 MB or more RAM
・ Hard disk drive with 15 MB or more memory space
・ VGA or SVGA monitor with 256 or more color display
2) Installing calibration software
・ Insert the calibration software installation diskette into the diskette drive.
・ Open Explorer.
・ Copy "DscCalDi.exe, Camapi32.dll" folder of the floppy disk drive in any folder on the hard disk.
6. Installing USB driver
If the USB driver is necessary, install Nikon View via CD-ROM packed with the camera.
- A19 ・ S1 -
VAA35001-R.3666.A