Fuels - Dolmar PS-34 Instruction Manual

Hide thumbs Also See for PS-34:
Table of Contents

Advertisement

Fuel
CAUTION:
This saw is powered by mineral-oil products (gasoline
(petrol) and oil).
Be especially careful when handling gasoline (petrol).
Avoid all ß ame or Þ re. Do not smoke (explosion hazard).
Fuel mixture
The engine of the chain saw is a high-efÞ ciency two-stroke engine.
It runs on a mixture of gasoline and two-stroke engine oil.
The engine is designed for unleaded regular gasoline with a
min. octane value of 91 ROZ. In case no such fuel is available,
you can use fuel with a higher octane value. This will not affect
the engine.
In order to obtain an optimum engine output and to protect
your health and the environment use unleaded fuel only.
For lubricating the engine use a two-stroke engine oil (quality
grade: JASO FC or ISO EGD), which is added to the fuel. The
engine has been designed for use of DOLMAR high-perform-
ance two-stroke engine oil and a mixture ratio of only 50:1 to
protect the environment. In addition, a long service life and
reliable operation with a minimum emission of exhaust gases
are ensured. DOLMAR high-performance two-stroke engine oil
is available in the following sizes to suit your individual require-
ments:
Measuring bottle
100 ml order number 980 008 106
If DOLMAR high-performance two-stroke engine oil is not avail-
able, we urgently recommended a mixture ratio of 40:1 with
other two-stroke engine oils, as otherwise optimum operation
of the engine cannot be guaranteed.
Caution: Do not use ready-mixed fuel from petrol
stations.
The correct mixture ratio:
50:1
when using DOLMAR high-performance two-stroke
engine oil, i. e. mix 50 parts gasoline with 1 part oil.
40:1
when using other two-stroke engine oils, i. e. mix 40
parts gasoline with 1 part oil.
NOTE:
For preparing the fuel-oil mixture Þ rst mix the entire oil
quantity with half of the fuel required, then add the remain-
ing fuel. Thoroughly shake the mixture before Þ lling it into
the chain saw tank.
Chain oil
Use an oil with adhesive additive for lubricating the chain and
guide bar. The adhesive additive prevents the oil from being
ß ung off the chain too quickly.
We recommend the use of chain oil which is bio-degradable in
order to protect the environment. The use of bio-degradable oil
may even be required by local regulations.
The chain oil BIOTOP sold by DOLMAR is made of special
vegetable oils and is 100% bio-degradable. BIOTOP has been
granted the „blue angel" (Blauer Umweltschutz-Engel) for being
particularly environment-friendly (RAL UZ 48).
1 l order number 980 008 107
1 l order number 980 008 112
Gasoline
+
1000 cm
3
(1 litre)
5000 cm
3
(5 litres)
10000 cm
3
(10 litres)
It is not wise to add more engine oil than speciÞ ed
to ensure safe operation. This will only result in a
higher production of combustion residues which
will pollute the environment and clog the exhaust
channel in the cylinder as well as the mufß er. In
addition, fuel consumption will rise and perform-
ance will decrease.
The Storage of Fuel
Fuels have a limited storage life. Fuel and fuel mixtures
age through evaporation, especially at high tempera-
tures. Aged fuel and fuel mixtures can cause starting
problems and damage the engine.Purchase only that
amount of fuel, which will be consumed over the next
few months. At high temperatures, once fuel has been
mixed it should be used up in 6-8 weeks.
Store fuel only in proper containers, in dry, cool,
secure locations!
AVOID SKIN AND EYE CONTACT
Mineral oil products degrease your skin. If your skin
comes in contact with these substances repeatedly
and for an extended period of time, it will desiccate.
Various skin deseases may result. In addition, allergic
reactions are known to occur.
Eyes can be irritated by contact with oil. If oil comes into
your eyes, immediately wash them with clear water.
If your eyes are still irritated, see a doctor immedi-
ately!
BIOTOP chain oil is available in the following sizes:
1 l
order number 980 008 210
5 l
order number 980 008 211
20 l
order number 980 008 213
Bio-degradable oil is stable only for a limited period of
time. It should be used within 2 years from the date of
manufacture (printed on the container).
50:1
40:1
20 cm
3
25 cm
3
100 cm
3
125 cm
3
200 cm
3
250 cm
3
D
E
13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ps-45

Table of Contents