Customising The Handset; Changing The Ring Tones; Activating Or Deactivating The Beeps - Eircom 8010R User Manual

LU Eircom 8010R_D66.book Page 22 Vendredi, 28. novembre 2008 10:05 10
C
USTOMISING THE HANDSET
C
USTOMISING THE
HANDSET
This menu allows you to modify the ring
tones and the visual interface of the handset,
and particularly:
• to assign different ring tones for incoming
calls outsides or intercom (between
handsets),
• to change the idle screen picture,
• to change the menu background colour,
• to activate or deactivate tones being
sounded when pressing the keypad
or when validating the settings
information of your handset.
• activate or deactivate silent mode.

Changing the ring tones

This menu enables you to associate a unique
ring tone to incoming calls or internal calls
(intercom).
On the navigator key
until the PERSONALIS. screen is displayed,
press OK to confirm.
Select RING TONE using
Valid. .
Select EXTERNAL CALL or INTERNAL
CALL using or . Press Valid.
Select the ring tone of your choice using
the or keys then press Volume
Adjust the ringer volume using
Valid. .
To exit the menu, press the red key

Activating or deactivating the beeps

On the navigator key
until the PERSONALIS. screen is displayed,
press OK to confirm.
Select RING TONE using
Valid.
Select BEEPS using
Valid.
Select the beep type using
Valid.
KEYTONE: the handset beeps when a key is
pressed.
BATTERY LOW: the handset beeps when
the battery is too low.
CHARGER: the handset beeps when you
hang up the handset.
, press or
An information screen displays the beep
status
or Inactive).
or . Press
• To change the status, press Edit
The status is modified on the screen.
Press Valid.
• To keep the status, press Valid.
.
To exit the menu, press the red key
.
or , press
22
, press
or
.
or . Press
.
or
.
for the selected item
.
.
or
. Press
. Press
(Active
.
.
.