Modifying Or Deleting A Birthday Alarm; Monitoring A Room - Eircom 8010R User Manual

LU Eircom 8010R_D66.book Page 21 Vendredi, 28. novembre 2008 10:05 10
A
CCESSORIES
Modifying or deleting a birthday
alarm
In the birthday alarm list screen, select the
alarm you wish to edit using
Option .
The following options are available:
- VIEW: to view the alarm data.
- EDIT: to change the alarm name or date.
- DELETE: to remove
or organiser alarm.
- RING TONE: to set the ring tone that will
sound when the alarm goes off.
- NEW ENTRY: to set up a new alarm.
To exit the menu, press the red key

Monitoring a room

Two handsets must be registred on the same
base to use this function. You can use your
handset to monitor a room. This allows you,
for example, to monitor a baby's room.
To do so, place one of the handsets in the
room to be monitored. This unit will be in
"sender" mode.
The other handset will remain with you, it is in
"receiver" mode.
On the receiver handset:
On the navigator key
until the ACCESSORIES
displayed, press OK to confirm.
Select ROOM MONITOR. using
Press Valid. .
Select the sender handset using
Press Call .
The sender handset rings, pick up using the
green key
On the transmitter handset:
or . Press
A screen invites you to activate the monitor
mode (sender mode). Press Yes
Both handsets are now in monitor mode.
• Place the sender handset in the room to
a birthday
be monitored.
.
• Keep the receiver handset with you.
, press or
To stop monitoring:
screen is
- Press Stop
The receiver set will automatically return to
or .
the standby screen.
- Press Stop
confirm
or .
Stop
the same time.
21
.
The handset in sender mode does
not ring to notify you of incoming
calls. It can therefore be placed in a
room where someone is sleeping.
When in monitor mode, the receiver
handset can be used to make calls.
To make a call: press Call
dial the number
To answer a call: press green
key .
At the end of the call, the handset
will automatically return in monitor
mode.
on the transmitter set.
on the receiver set and
by pressing Yes
on the transmitter handset at
.
and
and