Table of Contents
Advertisement
QUlCKSElUP
Follow the messages
and make the settings.
-Menu Language
-TV Type
-TV Aspect
Press to exit.
Select "DVD/CD".
Show the QUICK SETUP
screen.
@)
setup
Press to finish QUICK
SETUP.
Turn on the unit.
To change these settings later
Select "QUICK SETUP" in the "Others" menu
(~
page 25).
• Use
Aim at the remote control signal sensor
(~
page 11), avoiding
obstacles, at a maximum range of 7 m (23 feet) directly in front of
the unit.
Do not:
• mix old and new batteries.
• use different types at the same time.
• heat or expose to flame.
• take apart or short circuit.
• attempt to recharge alkaline or manganese batteries.
• use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can
severely damage the remote control.
Remove the batteries if the remote control is not going to be used for a
long period of time. Store in a cool, dark place.
RETURN
.,~,""',~
ENTER
To display the IJicture from the main unit, turn on your television and change its video input mode
(e.g. VIDEO 1, J'V 1, etc.).
• To change your television's video input mode, refer to its operating instructions.
• This remote control can perform some basic television operations
(~
page 10).
DVD
SETUP~
• Do not use rechargeable type batteries.
E)
Replace the cover.
e
Insert so the poles (+ and -) match those in the remote control.
The QUICK SETUP screen
assist~;
you to make necessary settings.
(steP7~
Performing QUICK SETUP
(steP6~
Preparingl the remote control
Hide quick links:
Advertisement
Table of Contents
