Panasonic SC-PT750 Operating Instructions Manual page 21

• Play Menu
This works only when the elapsed play time can be displayed. It also
works with all JPEG content.
• Picture Menu
Play Speed
Repeat
A-B Repeat
Advanced
Disc Review
I
DVD-VR
II
DVD-V
I
To change play speed
-from "xO.6" to "x1.4"
- Press [~ PLAY] to re1turn to normal play.
- After you change the speed
- Dolby Pro Logic II has no effect.
- Audio output switchl9S to 2-channel stereo (except
when Surround Music is on).
- Sampling frequency of 96 kHz is converted to
48 kHz.
- This function may not work depending on the disc's
recording.
(~ page 16, Repeat play)
Except
I
JPEG
I
[[VD-VR]
(Still picture part)
To repeat a specified :section
Press [ENTER] at the starting and ending points.
Press [ENTER] again to cancel.
I
DVD-VR
I
(Except still picture part)
I
DVD-vi
(Except +R/+R\N)
Allows you to browse the disc contents and start
playing from the selectE~d position. You can select
either "Intro Mode" or "Interval Mode" in "Advanced
Disc Review" in the "Disc" menu (~ page 23).
When you find a title/program to play
Press [~ PLAY].
- This may not work depending on the disc and the
play position.
-I
DVD-VR
I
This does not work when playing a playlist
(~page 19).
Picture
Mode
Video
Output
Mode
Transfer
Mode
Normal
Cinema1: Mellows images and enhances detail in
dark scenes.
Cinema2: Sharpens images and enhances detail in
dark scenes.
Animation: Suitable for animation.
Dynamic: Enhances the contrast for powerful images.
User: Press [ENTER] to select "Picture
Adjustment" (~ below).
Picture Adjustment
Contrast: Increases the contrast between light and
dark parts of the picture.
Brightness: Brightens the picture.
Sharpness: Adjusts the sharpness of the edges of
horizontal lines.
Color: Adjusts the shade of the picture's color.
Gamma: Adjusts the brightness of dark parts.
Depth Enhancer: Reduces the rough noise in the
background to give a greater feeling
of depth.
To select suitable picture quality with your television
(Video recordings will be converted to, and output as,
high-definition video.)
When HDMI connection is being used and "Video
Mode"
(~page
24, "HDMI" menu) is set to "On"
480i (interlaced)
480p (progressive)
720p (progressive)
1080i (interlaced)
1080p (progressive)
-Select a video output with an
"*"
mark. The
"*"
mark shows that the video output is acceptable
with your television.
-Selecting a video output without an
"*"
mark can
result in the picture being distorted.
If the picture is distorted, press and hold
[CANCEL] until the picture is displayed correctly.
(The output will return to "480p".)
-Output from the COMPONENT VIDEO OUT
terminals will be "480i".
When HDMI connection is not being used or "Video
Mode" (~ page 24, "HDMI" menu) is set to "Off"
480i (interlaced)
480p (progressive)
-When you select "480p", a confirmation screen
appears. Select "Yes" only if connecting to a
progressive output compatible television.
If you have chosen "480p", "720p", "1080i" or "1080p"
(~
above), select the method of conversion for
progressive output to suit the type of material.
Aut01: Detects 24 frame-per-second film content and
appropriately converts it.
Aut02: Compatible with 30 frame-per-second film
content in addition to 24 frame-per-second film
content.
Video: Select if the video content is distorted when
using Aut01 or Aut02.
(Continued on next page)
~
o
~
o
([
•