Section
19
System settings
Switching the auxiliary setting
Activate this setting when using an auxiliary
device connected to this unit.
1
Press the home button to switch to the
home display.
2
Touch the system key to open the sys-
tem menu.
3
Touch AUX Input on the system menu
to turn AUX Input on or off.
Setting AV input
Activate this setting when using an external
video component connected to this unit.
1
Press the home button to switch to the
home display.
2
Touch the system key to open the sys-
tem menu.
3
Touch AV Input on the system menu to
turn AV Input on or off.
Setting the navigation system
Activate this setting when connecting a
Pioneer Add-on Navigation system (sold sepa-
rately).
Device connection can be set when all of the
following conditions are met.
— The iPhone is not connected.
— No Bluetooth connection.
— The source is turned off.
1
Turn the source off.
Refer to Source off key on page 10.
2
Press the home button to switch to the
home display.
3
Touch the system key to open the sys-
tem menu.
62
En
4
Touch Device connection on the system
menu.
5
Touch NAVI to select.
NAVI – Navigation system
Selecting MirrorLink Mode
You can select the MirrorLink Mode setting
whether you use third party applications in
your smartphone or not.
1
Press the home button to switch to the
home display.
2
Touch the system key to open the sys-
tem menu.
3
Touch the desired setting next to
CD-ML100 Setting.
! Car Mode – You can use the launcher ap-
plications in your smartphone on the unit's
screen.
! App List Mode – You can use the third
party applications in your smartphone on
the unit's screen.
Updating the firmware for
the smartphone link adaptor
This function is used to update the smart-
phone link adaptor firmware with the latest
firmware.
For about smartphone link adaptor firmware
and updating, refer to our website.
You can update only when smartphone link
adaptor is available.
Important
! The USB storage device for updating must
contain only the correct update file. If the USB
storage device contains multiple files, the up-
date will fail.
! Never turn the unit off and never disconnect
the USB storage device while the firmware is
being updated.