Pioneer AVH-X5600BT Operation Manual page 47

Using MIXTRAX
! Flanger2 – A rushing sound that mimics
that rising and falling sounds of a jet en-
gine.
! Reverb – A fixed sound effect that creates
a reverberation effect.
! Echo2 – A fixed sound effect that creates
an echoing effect.
Sound effects
! Cross Fade – A sound effect that creates a
fade in and fade out effect between songs.
! Flanger1 – A rushing sound that mimics
that rising and falling sounds of a jet en-
gine.
! Echo1 – A sound effect that creates an
echoing effect.
! Loop – A sound effect that repeats play-
back of one section of a song track.
Note
Cross Fade cannot be selected for iPod audio
files.
Setting sounds and sound effects
as presets using the preset key
The Standard and Simple sound effects are
set already as default presets.
% Touch Standard or Simple to check the
settings.
The registered preset sound effect for the key
that was touched is set as a preset.
Registering sounds and sound
effects as presets
Registers a desired combination of sounds
and sound effects to Custom.
Touch Custom to easily set the desired sound
or sound effect.
1 Touch Custom.
2 Add a check mark to the desired sound
effect by touching the option.
The marked sound effect is registered as a pre-
set in Custom.
Notes
! If a sound effect is touched in the selection
screen for Standard or Simple, the Custom
screen is automatically displayed and the
sound effect is registered to Custom.
! You can listen to fixed sounds to hear exam-
ples by touching the speaker icon.
Section
14
47
En