Sleep; Software Upgrade; Reset Function - Samsung HW-C500 User Manual

Operation

Reset function

When the Power is on,
1. Press the MUTE button.
•
MUTE appears on the display.
2. Press the 9 button fi ve times and then press the ENTER button.
•
INITIAL : NO appears on the display.
3. Press the ▲▼ buttons to select YES.
•
The unit will turn off after 5 seconds.
When the Power is Off,
1. Press and hold the MEMORY button on the front of your AV Receiver
for longer than 5 seconds.
•
POWER LED will blink one time.
M

Using the RESET function will erase all stored settings.

Do not use this unless necessary.

SOFTWARE UPGRADE

Samsung may offer upgrades for AV Receiver's fi rmware in the future.
Please visit Samsung.com or contact the Samsung call center at
1-800-SAMSUNG (726-7864) to receive information about downloading
upgrades and using a USB drive. Upgrades will be possible by
connecting a USB drive to the USB port located on your AV Receiver.
M

Insert a USB drive containing the fi rmware upgrade into the USB port
on the back of the main unit.

Please be careful to not disconnect the power or remove the USB
drive while upgrades are being applied. The main unit will turn off
automatically after completing the fi rmware upgrade.
When software is upgraded, settings you have made will return to
their default (factory) settings. We recommend you write down your
settings so that you can easily reset them after the upgrade.

If you failed software upgrade, it is strongly recommended whole USB data format to FAT16 and retry software upgrade.

The NTFS USB File System can not be supported.

Depending on the manufacturer, the USB may not be supported.
50

SLEEP

SLEEP
7 8 9
PROLOG C PROLOG C AUDIO ASS N AUDIO ASS GN
DSP DSP
0 0
MUTE
TUNING TUNING
VOL VOL
/CH /CH
ASC ASC
TUNER MEMORY SUBWOOFER TUNER MEMORY SUBWOOFER MO/ST MO/ST
POPUP POPUP
SETUP/MENU SETUP/MENU INFO INFO
RETURN RETURN EXIT EXIT