Brother MFC-7860DW Quick Setup Manual page 17

Wired Network
Note
• If the installation does not continue
automatically, open the top menu again by
ejecting and then reinserting the CD-ROM or
double-click the start.exe program from the
root folder, and continue from step b to install
MFL-Pro Suite.
®
• For Windows Vista and Windows
when the User Account Control screen
appears, click Allow or Yes.
• If you want to install the PS driver (BR-Script3
printer driver), choose Custom Install and then
follow the on-screen instructions.
d
When the Firewall/AntiVirus detected screen
appears, choose Change the Firewall port
settings to enable network connection and
continue with the installation.
(Recommended) and click Next.
®
(Not for Windows
If you are not using the Windows
the user's guide of your firewall or antivirus
software for information on how to add the
following network ports.
 For network scanning, add UDP port 54925.
For network PC-Fax receiving, add UDP port

54926.
 If you still have trouble with your network
connection, add UDP port 137.
e
Follow the on-screen instructions to complete
setup.
IMPORTANT
DO NOT cancel any of the screens during the
installation. It may take a few seconds for all
screens to appear.
®
7 users,
2000 users)
®
Firewall, see
Windows
Note
• If your machine is not found over the network,
confirm your settings by following the on-screen
instructions.
• You can find your machine's IP address and the
node name by printing out the Network
Configuration Report. See Print the Network
Configuration Report on page 37.
®
• For Windows Vista and Windows
when the Windows Security screen appears,
select the check box and click Install to
complete the installation correctly.
• If an error message appears during the
software installation, run the
Installation Diagnostics located in
Start/All Programs/Brother/MFC-XXXX LAN
(where MFC-XXXX is your model name).
®
®
7 users,
17