Brother MFC-7860DW Quick Setup Manual page 25

For Wireless Network Users
h
Choose Temporarily use a USB cable
(Recommended) and then click Next.
i
Temporarily connect the USB cable (not
included) directly to the computer and the
machine.
j
If the confirmation screen appears, check the
box and click Next. When the following screen
appears, check Yes if you want to connect with
the listed SSID. Click Next and go to n.
k
The wizard will search for wireless networks
available from your machine. Choose the SSID
that you wrote down for your network in
step 16 on page 22, and then click Next.
Note
• If the list is blank, check that the access point
has power and is broadcasting the SSID, and
then see if the machine and the access point
are within range for wireless communication.
Then, click Refresh.
• If your access point is set to not broadcast the
SSID you can manually add it by clicking the
Advanced button. Follow the on-screen
instructions for entering the Name (SSID), and
then click Next.
l
If your network is not configured for
Authentication and Encryption, the following
screen will appear. To continue configuration,
click OK and go to n.
m
Enter the Network Key you wrote down in
step 16 on page 22 and then enter the key
again in Confirm Network Key, then click
Next.
25