Configure The Wireless Settings - Brother MFC-7860DW Quick Setup Manual

For Wireless Network Users
Configuration using the Installation CD-ROM and temporarily using a USB cable
®
(Windows only)
17
Configure the wireless
settings
IMPORTANT
• You need to temporarily use a USB cable or
Ethernet cable during configuration (cable
not included).
®
• For Windows 2000 and Windows
you must have the wireless settings you
wrote down for your network in step 16 on
page 22 before you proceed.
a
Put the installation CD-ROM into your CD-ROM
drive. If prompted, select your model and language.
Note
If the Brother screen does not appear automatically,
go to My Computer (Computer), double-click the
CD-ROM icon, and then double-click start.exe.
b
Click Initial Installation and then Install
MFL-Pro Suite.
c
Click Yes if you accept the license agreement.
Follow the on-screen instructions.
d
Choose Wireless Network Connection and
then click Next.
Note
For Windows Vista
User Account Control screen appears, click
Allow or Yes.
24
®
XP users
® ®
and Windows 7, when the
e
When this screen appears, choose Change
the Firewall port settings to enable network
connection and continue with the
installation. (Recommended) and click Next.
®
(Not for Windows
If you are not using the Windows
the user's guide of your firewall or antivirus
software for information on how to add the
following network ports.
For network scanning, add UDP port 54925.

 For network PC-Fax receiving, add UDP port
54926.
 If you still have trouble with your network
connection, add UDP port 137.
f
Choose No and then click Next.
g
Read the Important Notice. Check the box
after you confirm the SSID and Network Key,
and then click Next.
Note
If you are installing from a wireless PC running
®
Windows Vista or Windows
and then click next. The installer will automatically
detect your wireless network settings.
2000 users)
®
Firewall, see
®
7, check the box