Removing The Unit; Specifications - Sony CDX-GT450U Operating Instructions Manual

Removing the unit
1
Remove the protection collar.
o
Detach the front panel (page 7).
e
Pinch both edges of the protection collar,
then pull it out.
2
Remove the un it.
o
Insert both release keys simultaneously
until they click.
e
Pull the release keys to unseat the unit.
e
Slide the unit out of the mounting.
Specifications
FOR UNITED STATES CUSTOMERS. NOT
APPLICABLE IN CANADA, INCLUDING
IN THE PROVINCE OF QUEBEC.
POUR lES CONSOMMATEURS AUX
ETATS-UNIS. NON APPLICABLE AU
CANADA, V COMPRIS lA PROVINCE DE
QUEBEC.
AUDIO POWER SPECIFICATIONS
CEA2006 Standard
Power Output: 17 Watts RMS x 4 at
4 Ohms < 1% THD+N
SN Ratio: 80 dBA
(reference: I Watt into 4 Ohms)
Tuner section
FM
Thning range: 87.5 - 107.9 MHz
Antenna (aerial) terminal:
External antenna (aerial) connector
Intermediate frequency: 150 kHz
Usable sensitivity: 10 dBf
Selectivity: 75 dB at 400 kHz
Signal-to-noise ratio: 70 dB (mono)
Separation: 40 dB at I kHz
Frequency response: 20 - 15,000 Hz
AM
Tuning range: 530 - 1,710 kHz
Antenna (aerial) terminal:
External antenna (aerial) connector
Intermediate frequency: 25 kHz
Sensitivity: 26 flY
CD Player section
Signal-to-noise ratio: 120 dB
Frequency response: 10 - 20,000 Hz
Wow and flutter: Below measurable limit
USB Player section
Interface: USB (Full-speed)
Maximum current: 500 rnA
Power amplifier section
Output: Speaker outputs
Speaker impedance: 4 - 8 ohms
Maximum power output: 52 W x 4 (at 4 ohms)
General
Outputs:
Audio outputs terminal (front, rear/sub switchable)
Power antenna (aerial) relay control terminal
Power amplifier control terminal
Inputs:
Remote controller input terminal
Antenna (aerial) input terminal
AUX input jack (stereo mini jack)
USB signal input connector
•
continue to next page
-+
21